*Exact model shown in 360° view may vary
![XJ Tractor](https://lstractorshowlow.com/wp-content/uploads/2021/02/20181010791O38HNGD.png)
The XJ Series offers versatility that compact customers appreciate. Ample strength and durability allows you to work all day with a large number of LS implements and attachments. The XJ is not simply limited to a tractor and loader configuration, it can be equipped with a backhoe, mid-mount mower, snow blower, as well numerous three-point implements. Versatility and performance make this compact tractor a leader.
XJ2025H – 24.4HP
![](https://lstractorusa.com/wp-content/uploads/2019/07/1_All-Series_4WD_128x128-width150height150.png)
4WD (FRONT WHEEL MECHANICAL ASSIST)
Go from 2WD to a 4WD with a simple move of a lever.
![](https://lstractorusa.com/wp-content/uploads/2019/07/XJ_PTO_Switch_v1_128x128-width150height150.png)
ELECTRO HYDRAULIC CLUTCH PTO
Turn the PTO on or off with the turn of a switch.
![](https://lstractorusa.com/wp-content/uploads/2019/07/XJ_PTO_Switch_v2_128x128-width150height150.png)
PTO LEVER SELECTOR
Allows you to select the rear-PTO, mid-PTO or both.
![](https://lstractorusa.com/wp-content/uploads/2019/07/XJ_Mid-PTO_128x128-width150height150.png)
STANDARD MID PTO
2000 RPM Mid PTO for optional 60” mid-mount mower or 50” front mount snow blower
![](https://lstractorusa.com/wp-content/uploads/2021/01/XG_Standard_Hydrostatic_Power_Steering_128x128-width150height150.png)
STANDARD HYDROSTATIC POWER STEERING
Makes turning easier, improves control and reduces fatigue.
![](https://lstractorusa.com/wp-content/uploads/2019/07/Standard_Foldable_ROPS-width150height150.jpg)
STANDARD FOLDABLE ROPS
Allows Storage in low clearance buildings or sheds.
![](https://lstractorusa.com/wp-content/uploads/2019/07/MT1_Choice-of-Tires_128x128-width150height150.png)
YOUR CHOICE OF TIRES AT NO ADDITIONAL COST*
Choose Industrial or Versa Turf tires at no additional cost. * Subject to dealer inventory.
![](https://lstractorusa.com/wp-content/uploads/2021/01/3-Point_Hitch-width150height150.jpg)
3-POINT HITCH
Category 1 with a hitch lift capacity of 1,808 lbs. allows usage of a wide variety of implements.
![](https://lstractorusa.com/wp-content/uploads/2021/01/XG_3Point_HitchControls_128x128-width150height150.png)
ERGONOMICALLY DESIGNED 3-POINT HITCH CONTROLS
Easily accessible for maximum comfort and convenience with hydraulic position control.
![](https://lstractorusa.com/wp-content/uploads/2021/02/XJ-XR4100_RearLight_128x128-width150height150.png)
STANDARD REAR WORK LIGHT
Adjustable light to improve visibility where you need it.
![](https://lstractorusa.com/wp-content/uploads/2021/01/Draw_bar_128x128-width150height150.png)
STANDARD DRAW BAR
Increases the usefulness of the tractor without the additional optional cost.
![](https://lstractorusa.com/wp-content/uploads/2021/02/Large_Fuel_Tank_-width150height150.jpg)
LARGE FUEL TANK
Provides long operation times between fill-ups.
![](https://lstractorusa.com/wp-content/uploads/2021/01/14_XG-Series_Rubber_Mat_128x128-width150height150.png)
STANDARD RUBBER MAT
Reduces noise, vibration and prevents slipping.
![](https://lstractorusa.com/wp-content/uploads/2021/02/8_XJ-Series_Tier_4_Engine_128x128-width150height150.png)
MITSUBISHI TIER 4 ENGINE
Fuel efficient engine delivers reliable performance. Rubber engine mounts reduce operator platform vibration. Standard preheat starting aid improves cold weather starting.
![](https://lstractorusa.com/wp-content/uploads/2021/01/17_XG-Series_Easy_Open_One-Piece_Hood_128x128-width150height150.png)
EASY OPEN ONE-PIECE STEEL HOOD
Provides accessibility for easy maintenance.
![](https://lstractorusa.com/wp-content/uploads/2021/02/XJ_128x128-width150height150.jpg)
MODERN ERGONOMIC DESIGN
This small chassis compact is ergonomically designed and stylish.
ENGINE
- Type: 3-cylinder, Indirect-injection, Water-cooled
- Model (Tier 4 ): Mitsubishi S3L2
- Engine HP (Gross): 24.4
- PTO HP: 18.5
- Rated Speed (RPM): 2,500
- Displacement (cu in): 80.4
- Fuel Tank Capacity (gal): 6.6
- Alternator: 12V – 50 Amps
DRIVE TRAIN
- Transmission: Hydrostatic Drive
- No. of Speeds: 2 Ranges
- Brakes: Wet, Multi Disc
- Steering: Hydrostatic Power Steering
PTO
- Type: Independent
- Mid PTO: Standard (2000 rpm)
- Rear PTO: Standard (540 rpm)
HYDRAULIC SYSTEM
- Implement pump (gpm): 5.9
- Steering pump (gpm): 2.6
- Total flow (gpm): 8.5
- Category, 3 pt hitch: CAT 1
- Hitch Lift capacity (lb.): 1,433
- Lift control type: Manual Position
DIMENSION
- Overall length with 3pt (in.): 103
- Wheelbase (in.): 59
- Min. overall width with IND tires (in.): 44.9
- Height to top of ROPS (in.): 92.3
TIRE SIZE
- Industrial Front/Rear: 23 x 8.5 – 12 / 33 x 12 -16.5
- Turf Front/Rear: 23x 8.5 – 12 / 33 x 12.5 – 16.5
WEIGHT
- Total weight without ballast (lbs): 1,609
Remote Valve – 1 pair (2 outlets)
Detent Kit
Backhoe Options: Thumb, big foot options, and rubber pads
Snowblower: Hydraulic Chute Rotation
Cab
FRONT LOADER – LL2101
- Maximum Lift Height (in): 85.7
- Clearance with Attachment Dump(in): 65
- Reach at Maximum Height (in): 22
- Maximum Dump Angle (deg.): 52
- Maximum Rollback Angle (deg.): 43
- Digging Depth (in): 4.4
- Overall Height in Carry Position (in): 42.8
- Lift Capacity (@ Pivot Pin) (lbs): 1,270
- Breakout Force (@ Pivot pin) (lbs): 1,640
- Approx. Weight (Loader w/o Bucket) (lbs): 638
BACKHOE – LB1104
- Digging Depth (in): 79.3
- Reach From centerline of swing Pivot (in): 113.3
- Loading Height (in): 56.9
- Swing Arc (deg.): 150
- Transport Height (in): 75.2
- Bucket Rotation (deg.): 163
- Stabilizer Spread (Down Position) (in): 87.7
- Stabilizer Spread (Up Position) (in): 55.7
- Bucket Digging force (lbs): 2,096
MID MOUNT MOWER – LM3560
- Cutting Width (in): 60
- Overall Width (in): 74
- Cutting Height Range (in): 1 to 4-1/8
- Deck shell Thickness (in): 10-Gauge (0.1345 in.) Grade 50 steel
- Spindle Speed at 2000 RPM: 2,842 RPM
- Blade Tip Speed (ft./min): 18,000
- Number of Blades: 3
- Blade Length (in): 21
- Blade Width, in. 2-1/2
- Blade Thickness (in): 1/4
- Shipping Weight of Base 60” Deck (lbs): 450
SNOW BLOWER – LS3150
- Overall width (in): 50
- Cutting width (in): 49 3/4
- Cutting height (in): 20
- Impeller drive: Chain #40
- Auger drive: Worm gear
- Auger diameter (in): 12 3/4
- Impeller diameter (in): 15 3/4
- Number of blades on impeller: 3
- Chute rotation: Manual (Hydraulic Optional)
- Adjustable heavy skid shoes: yes
- Auger shear bolt protection, yes
- Impeller shear bolt protection: yes
- Approx. shipping weight (lbs): 350